Detailed Instructions; Establish The Connection Between The Computer And The Device; Check The Firmware Versions; Start The Ldu And Follow The Instructions - Lightware MODEX-F15-OPTS-TX User Manual


  
8. Firmware Upgrade
▪ If you do not want to check for updates automatically, uncheck the Check for updates automatically
option.
If you want to postpone the update, a reminder can be set with different delays from the drop down list.
▪
▪ If the proxy settings do not range with the required settings, set the proper values then click the OK
button.
Step 3. Press the Update button to download the new version; the installer will start.
8.4. Detailed Instructions
8.4.1. Establish the Connection between the Computer and the Device
Make sure that the computer and the device are connected via an Ethernet cable and the connection is
established between them.
8.4.2. Check the Firmware Versions
Before starting the upgrade process, please check the actual firmware version. It is displayed on the front panel
menu (see the Firmware section) or in Settings menu on
or can be queried with LW3 command (see more information about it in
Installed Update
firmware version version
In this case, please contact our support team (support@lightware.com)
v1.x. v2.0 or above
for the .lfp packages and detailed instructions.
v2.0 or above v2.0 or above

Start the LDU and Follow the Instructions

Highly not recommended. In this case, please contact our support
v2.0 or above v1.x. team (support@lightware.com) for the .lfp packages and detailed
instructions.
MODEX-F15-OPTS, MODEX-F15-OPTM series – User's Manual
Status tab in the Lightware Device Controller software
Query the Firmware Version section).
Instructions
8.4.3. Start the LDU and Follow the Instructions
After launching LDU welcome screen appears:
A
After pressing the button a list will appear showing the supported devices:
Click on the Extender button on the main screen.
74