Vlan - AVT MAGIC TH6 POTS Hardware & Software Manual

O p e r a t i o n v i a W i n d o w s
P A G E 7 2
P C S o f t w a r e
5.6.4.2.9

VLAN

In case of using a VLAN for your VoIP network you can enable the VLAN tag-
ging of the system under System Settings
FIG. 46
You can configure the VLAN settings separately for
– PC Control & PRETALK Streaming and
– VoIP
You need to enter the TPID (tagging) as well as the Priority and the VLAN ID
(VID (12-Bit)).
TIP
In case of using a VLAN for your VoIP telephone network, you should select
the 802.1Q Tag under TPID and Priority 6 (VOICE) for VoIP. The correct
VLAN ID is managed by your network administrator. Please ask him for de-
tails.
NOTE
If you configure wrong settings you will lose the connection to the system. In
this case you can reset your VLAN configuration via the front panel of the
system.
VLAN
→
VLAN.