5.6.5
Submenu Presets
Via Presets you can edit, delete or load already existing Presets or create new
ones.
5.6.5.1
Manage Presets
Your created Presets can be managed via the menu Configuration
→
sets
Manage Presets.
FIG. 51
All already existing Presets are displayed in the list.
• With the use of the New button you create a new Preset. The current con-
figuration of the system is not changed by this function. First, select an
meaningful name. The length of the name must not surpass eight charac-
ters. Special characters are not allowed. Please mind that you use unique
names.
FIG. 52
Subsequently, the configuration dialogue is opened to edit the Preset. The
current configuration is always displayed as basis of a Preset which you
can adjust according to your wishes. The following configurations can be
saved as Preset:
– Mode & Audio Line (see Page 44)
– HOLD Signal (see Page 47)
– Signal Processing (see Page 48)
– Database (see Page 50)
– Relay / TTL (see Page 53)
O p e r a t i o n
v i a
W i n d o w s
MANAGE PRESETS
NEW CONFIGURATION
P C
S o f t w a r e
→
Pre-
P A G E 7 7