Table of Contents
Advertisement
O p e r a t i o n
v i a
W i n d o w s
P A G E 3 0
P C
S o f t w a r e
FIG. 10
Please follow the instructions of the installation routine. Subsequently, the
setup program is executed.
After installation the software can be started by clicking on the MAGIC TH6
desktop icon.
Connect the system via the LAN interface with your network. If you do not
have a network you can also connect the unit to your PC directly via a so-
called cross over network cable.
How to configure the LAN interface is described below (see CHAPTER 5.6,
Page 41).
Alternatively, you can also use the RS232 interface and a serial 1:1 cable (only
Pin 2 and Pin 3 are used, Pin 5=Ground) to connect your PC with the system.
5.4
Software update from the internet
Software updates can be downloaded from our homepage
free of charge. Please go to our Download section and select Software. Under
MAGIC TH6 please download the file with the ID number 430378. When the
download is completed, execute setup and follow the instructions. In addition
to the PC Software, the setup also includes the Firmware for the system. If it
also has to be updated, the MAGIC TH6 Software displays an error message
when it is started. The instructions for a Firmware update are described later
on (see CHAPTER 5.7.4, Page 87).
SETUP WIZARD
http://www.avt-nbg.de
Hide quick links:
Advertisement
Table of Contents
