Lcd Display - AVT MAGIC TH6 POTS Hardware & Software Manual

O p t i o n : M A G I C T H 6
- - - - -
0 1 2 3 4 5 6 6 7 7 8
P A G E 9 8
K e y p a d
The keypad provides all basic control functions of the MAGIC TH6 software
without screening information.
Please connect the 9-pole SUB-D connector of the MAGIC TH6 Hybrid Key-
pad with the RS232 interface of the MAGIC TH6 System. Since the MAGIC
TH6 Hybrid Keypad requires its own power supply, please plug in the exter-
nal power supply included in delivery and connect the 6-pole Mini-DIN
socket of the external power supply with the 6-pole Mini-DIN connector of
the MAGIC TH6. If everything is connected correctly, the display is illumi-
nated. The connection state of all lines is displayed after booting.
7.1

LCD Display

The LCD Display with 2 x 20 characters generally displays information about
the current connection status of the available channels in the first line. The fol-
lowing indications are possible:
TAB. 2
Display
> >
< <
-
A I
H O
P R
L o
If a telephone number is entered it will be displayed in the second line. The
-
phone number can be entered with the keys 0...9.
NOTE
The cypher last entered can be deleted by pressing the
The entire entry is deleted by pressing the
If there is a connection error, the ISDN provides various alarm messages.
Please see the following table for their meanings. The LCD display shows the
relevant B channel first followed by the alarm message.
TAB. 3
Alarm message
Unass. number
No route
Normal disc.
User busy
No user resp.
Call rejected
Number chang.
Destin. error
Inval. number
OVERVIEW OF THE STATUS INDICATIONS
Meaning
Outgoing call
Incoming call
No connection
Caller is in On Air mode
Caller is in Hold mode
Caller is in Pretalk mode
Line is locked
ISDN ALARM MESSAGES
Description
The number is not recognised by the ISDN. Please check your entry.
No route. When this message appears the ISDN is normally overloaded.
Please dial again.
The connection has been cleared.
The number called is busy.
The called number is not responding. Possibly the wrong number was di-
alled.
The call was rejected. Possibly the partner has rejected your call.
The dialled number has been changed.
The called end is not operational. Maybe the unit is switched off.
Invalid Number.
C
button.
AC
button.