Voip (Lan/Sip) - AVT MAGIC TH6 POTS Hardware & Software Manual

O p e r a t i o n v i a W i n d o w s
VOIP
P A G E 6 6
P C S o f t w a r e
5.6.4.2.6

VoIP (LAN/SIP)

The parameters for the VoIP Line interface have to be configured.
FIG. 43
For each caller line the following parameters must be entered in the table:
• IP address or name of the SIP server under SIP Server.
• If a firewall is in operation Use STUN must be selected.
• The own VoIP number must be entered under User Name.
• A few SIP Server require a so-called User Authentication.
• A password is required for the registration by the SIP server. It must be
provided by the service provider. Enter in field Password.
• The Audio UDP Port will be given by the system as 5004 to 5009, but can
be modified.
• In the field Display Name a name can be entered which is transmitted to
the connected partner.
STUN Server Parameters
If a STUN sever is selected in the table, the STUN server parameters must be
entered in the field STUN Server Parameters.
• IP address or name of the STUN Server.
• Selection of the Nat Keep Alive Message Time which is the repetition
time for the telegrams to the STUN server. The message time is given by
the STUN server.
VOIP (LAN/SIP)