Record Button (Pretalk Streaming Clients Only) - AVT MAGIC TH6 POTS Hardware & Software Manual

O p e r a t i o n v i a W i n d o w s
P A G E 3 8
P C S o f t w a r e
By clicking on the level indication, a bigger level meter for the received signal
appears. It displays the received Audio signal level on the top of the field as a
value in dB. A white pointer can be moved to adjust the amplification and to
control the received Audio signal level.
For each caller line you can switch on an Automatic Gain Control (AGC). This
can be selected in the configuration under System
→
Signal Processing or you simply use the AGC button below the level
control of each caller line.
To close the window for the level control of the received signal, please press
the X button.
NOTE
If the Automatic Gain Control (AGC) is activated, AGC is displayed in red
on the level meter of the respective caller line as well as on the AGC button.
The colour of the pointer for adjusting the volume of the caller signal also
changes from white to red.
5.5.1.10

Record button (Pretalk Streaming Clients only)

If the fee-based Pretalk Streaming Upgrade (ID: 430464) is enabled and your
PC is configured for Pretalk Streaming, the Record button will be displayed
in the user interface.
With the Record button you can record the caller's Audio signal when he is
switched to Pretalk. Just press the button and the recording will start. The but-
ton turns red during a recording. To stop the recording, just press the Record
button a second time and the Audio file (.wav) will be saved on your PC.
To display all recorded Audio files, please press the arrow button next to the
Record button. The window Recordings will be opened. To listen to a re-
cording, you just need to click on the respective entry.
FIG. 18 RECORDINGS
→
Operation Settings