Pots Interface: Outside Line - AVT MAGIC TH6 POTS Hardware & Software Manual

POTS
• The Busy/Drop Tone may vary from country to country. Therefore, you
can measure the values with the function Measure Values under
BUSY/DROP Tone. In this way you make sure that the system recognises
when a call is dropped or when the line is busy.
To measure the Busy/Drop tone you just need to e.g. call a busy line on
caller line 1 and press the button Measure Values.
• Under High pass filter cut off frequency you can select different filter
values for Receive and Transmit direction to eliminate disturbances in
the telephone signal. All signal parts below the selected frequency are
eliminated. The recommended setting is 300 Hz for both directions.
• Under POTS line level adjustment you can adjust the level for the tele-
phone signal separately for the Receive and Transmit direction.
5.6.4.2.5

POTS Interface: Outside Line

NOTE
This menu can only be displayed if you are working with a MAGIC TH6
POTS system and the POTS operating mode is selected (see CHAPTER
5.6.4.2.2, Page 60).
FIG. 42
For configuration see POTS Interface: PABX (see CHAPTER 5.6.4.2.4,
Page 64).
O p e r a t i o n v i a W i n d o w s
POTS INTERFACE: OUTSIDE LINE
P C S o f t w a r e
P A G E 6 5