Table of Contents
Advertisement
O p e r a t i o n
v i a
W i n d o w s
P A G E 3 4
P C
S o f t w a r e
If you have selected a Two Faders Mode or the Six Faders Mode in the con-
figuration under Operation Settings
AIR buttons are displayed as ON AIR 1 and 2 in the Two Faders Modes and
as ON AIR 1...6 in the Six Faders Mode.
TIP
Via the menu Operation Settings
your own label for the PRETALK, HOLD and ON AIR buttons under Audio
Line Assignment
Via the DROP key the connection to the caller can be dropped. If no connec-
tion exists the line is locked by pressing the DROP key. The button turn pur-
ple and is labelled with LOCK. In this case the caller hears the Busy signal.
The line is unlocked by pressing the key again. Outgoing calls are still possible
in the locked status.
When there is an incoming call, all keys are displayed in yellow and blinking.
Each of these keys can be selected. In this way, you can switch a caller directly
to ON AIR for instance.
In contrast to this, when there is an outgoing call, the keys PRETALK, HOLD
and ON AIR are displayed yellow and static whereas the key DROP is dis-
played yellow and blinking. Only the DROP button can be selected to stop the
outgoing call.
5.5.1.5
HD Voice and Voice Disguise
If the fee-based HD Voice Upgrade (ID: 430466) has been activated and the
system is used in the Voice-over-IP operating mode, this status key shows
that the connection has been established with G.722 in 7-kHz quality.
If the red VD button is displayed on the right side of each caller line, the Voice
Disguise function is activated. This function distorts the caller signal so that
he/she cannot be recognised. Voice Disguise can be activated or deactivated
under the submenu Mode & Audio Line (see CHAPTER 5.6.4.1.1, Page 44).
5.5.1.6
Caller Screening
If you click on the Assign button which is displayed next to the telephone
number of the caller, the Select Caller window is opened. The Assign button
works only during incoming calls, outgoing calls and an existing connection.
→
Mode & Audio
→
Mode & Audio you can also define
→
Custom Label.
→
Mode, the ON
Hide quick links:
Advertisement
Table of Contents
