Configuration Of The Lan Interface; Working With Presets - AVT MAGIC TH6 POTS Hardware & Software Manual

F r o n t D i s p l a y a n d
P A G E 2 6
K e y p a d O p e r a t i o n
4.1.2

Configuration of the LAN interface

To configure the LAN interface follow the instructions below:
– Press the
– Go to the submenu
the IP address for the system by using the numerical keys 0...9 of the key-
pad. Press
If necessary, the
changed in the same way in the submenu
NOTE
Please ask your network administrator for the correct settings.
4.1.3

Working with Presets

The MAGIC TH6 differentiates between
tings
.
System settings are settings that do not change during normal operation such
as e. g. language, date/time etc. These parameters cannot be saved as presets
since a configuration is usually only required when the system is put into op-
eration.
Operation settings need to be reconfigured depending on the application. To
easily recall recurring configurations you can store up to 10 Presets.
You reach the menu for the Presets by pressing the
sor key
tion.
In the insert field
enter a character with the help of the alphanumerical keypad of the system,
the corresponding entries of the Preset list are filtered out.
Alternatively, you can select a preset with the cursor keys
the list
.
If you now press the
By the softkey
via the softkey
load
– : The selected Preset is loaded.
new
– : With the help of this function you can create a new Preset. All current
Operation Settings are stored as basic and can be adjusted afterwards.
Save
– : The selected Preset is overwritten with the current Operation Set-
tings. For safety reasons a confirmation is required
Delete
– : The currently selected Preset is deleted. For safety reasons a con-
firmation is required.
Menu System Settings
softkey and select
LAN SETTINGS
and select
OK
to confirm your entry.
SUBNET MASK DEFAULT GATEWAY
,
three times and by pressing the softkey
Presets
you can search for a certain Preset. As soon as you
Ok
button the selected Preset is loaded immediately.
OPTS
(Options) the following functions which you can select
select
are realized:
.
IP ADDRESS
. Now you can enter
DNs SERVER
and
LAN SETTINGS
.
system settings operation set-
and
menu
softkey once, the cur-
select
once as confirma-
and
can be
from