As already mentioned, we recommend to separate the
VoIP network from the Control network for VoIP
applications in general
An additional possibility is to use VLANs if your
switch/router supports that
The configuration is done under VLAN
Before you Enable VLAN, please make sure that your
administrator has configured the Switch Port
correspondingly
▪
Activate the 802.1Q Tagging for Web and VoIP services
▪
Please select the desired Priority
(Standard for VoIP = 6 Voice)
▪
Under VID you need to enter the VLAN IDs which has been
allocated in the switch/router
If you did something wrong in the configuration
and you have no longer access to your system
you can switch-off the VLAN support via the
front panel of the system
VLAN Configuration (1)
23