E-Series, 8480 And N8480 Series Sensor Models - Keysight N1911A Installation Manual

1 Getting Started

E-Series, 8480 and N8480 Series sensor models

Using the N1917A/B/C/D cable, any Keysight 8480, N8480 Series or E-Series
power sensor can be connected to the N1911A or N1912A power meters.
The following shows the procedure for single channel meters configured with front
panel mounted POWER REF and CHANNEL connectors. The procedure is similar
for meters configured with rear panel connectors. Also, for dual channel meters
(N1912A), you should repeat the procedure for the channel B sensor.
1 Connect the sensor to a Keysight N1917A cable.
2 Connect the other end of the N1917A cable to the CHANNEL A (or CHANNEL
18
B) input connector.
Keysight N1911A and N1912A Installation Guide