Compliance And Markings; Electromagnetic Compatibility (Emc); Safety - Keysight N1911A Installation Manual

Compliance and Markings

Electromagnetic Compatibility (EMC)

This product conforms with the protection requirements of European Council
Directive 89/336/EEC for Electromagnetic Compatibility (EMC).
The conformity assessment requirements have been met using the technical
construction file route to compliance, using EMC test specifications EN
55011:1991 (Group 1, Class A) and EN 50082-1:1992.
In order to preserve the EMC performance of the product, any cable which
becomes worn or damaged must be replaced with the same type and
specification.
Refer to the

Safety

This instrument has been designed and tested in accordance with publication
EN61010-1(2001) / IEC 1010-1(2001) / CSA C22.2 No. 61010-1-04 Safety
Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use, and has been supplied in a safe condition. The instruction documentation
contains information and warnings which must be followed by the user to ensure
safe operation and to maintain the instrument in a safe condition.
12
"Declaration of Conformity" on page Notices.
Keysight N1911A and N1912A Installation Guide