The Dns Route Add Screen; The Policy Route Screen - ZyXEL Communications PMG2006-T20A User Manual

Table 19 Network Setting > Routing > DNS Route (continued)
LABEL
Subnet Mask
Modify

8.3.1 The DNS Route Add Screen

You can manually add the PMG2006-T20A's DNS route entry. Click Add New DNS Route in the Network
Setting > Routing > DNS Route screen. The screen shown next appears.
Figure 33 DNS Route Add
The following table describes the labels in this screen.
Table 20 DNS Route Add
LABEL
Active
Domain Name
Subnet Mask
WAN Interface
OK
Cancel

8.4 The Policy Route Screen

Traditionally, routing is based on the destination address only and the PMG2006-T20A takes the shortest
path to forward a packet. Policy route allows the PMG2006-T20A to override the default routing
behavior and alter the packet forwarding based on the policy defined by the network administrator.
Policy-based routing is applied to outgoing packets, prior to the normal routing.
You can use source-based policy forwarding to direct traffic from different users through different
connections or distribute traffic among multiple paths for load sharing.
Chapter 8 Routing
DESCRIPTION
This is the subnet mask of the DNS route entry.
Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
DESCRIPTION
Select to enable or disable this DNS route.
Enter the domain name of the DNS route entry.
Enter the subnet mask of the DNS route entry.
Select the WAN connection through which the PMG2006-T20A forwards DNS requests for this
domain name.
Click this to save your changes.
Click this to exit this screen without saving any changes.
PMG2006-T20A User's Guide
66