ZyXEL Communications PMG2006-T20A User Manual page 135

SNMP itself is a simple request/response protocol based on the manager/agent model. The manager
issues a request and the agent returns responses using the following protocol operations:
• Get - Allows the manager to retrieve an object variable from the agent.
• GetNext - Allows the manager to retrieve the next object variable from a table or list within an agent.
In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it initiates a Get
operation, followed by a series of GetNext operations.
• Set - Allows the manager to set values for object variables within an agent.
• Trap - Used by the agent to inform the manager of some events.
Click Maintenance > SNMP to open the following screen. Use this screen to configure the PMG2006-T20A
SNMP settings.
Figure 96 Maintenance > SNMP
The following table describes the fields in this screen.
Table 76 Maintenance > SNMP
LABEL DESCRIPTION
SNMP Agent Select Enable to let the PMG2006-T20A act as an SNMP agent, which allows a manager
station to manage and monitor the PMG2006-T20A through the network. Select Disable to
turn this feature off.
Get Community Enter the Get Community, which is the password for the incoming Get and GetNext requests
from the management station.
Set Community Enter the Set community, which is the password for incoming Set requests from the
management station.
Trap Community
Enter the Trap Community, which is the password sent with each trap to the SNMP manager.
The default is public and allows all requests.
System Name Enter the SNMP system name.
System Location Enter the SNMP system location.
System Contact Enter the SNMP system contact.
Trap Destination Type the IP address of the station to send your SNMP traps to.
Apply Click this to save your changes back to the PMG2006-T20A.
Cancel Click this to restore your previously saved settings.
Chapter 24 SNMP
PMG2006-T20A User's Guide
136