Interface Grouping Criteria - ZyXEL Communications PMG2006-T20A User Manual

Table 41 Interface Group Configuration (continued)
LABEL
OK
Cancel

11.2.2 Interface Grouping Criteria

Click the Add button in the Interface Grouping Configuration screen to open the following screen.
Figure 59 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 42 Interface Grouping Criteria
LABEL
Source MAC
Address
DHCP Option 60
Enable
wildcard
DHCP Option 61
DHCP Option
125
Enterprise
Number
Manufactur
er OUI
Serial
Number
Product
Class
OK
Cancel
Chapter 11 Interface Grouping
DESCRIPTION
Click OK to save your changes back to the PMG2006-T20A.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select this option and enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such
as the type of the hardware or firmware.
Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP
option 60.
Select this and enter the device identity of the matched traffic.
Select this and enter vendor specific information of the matched traffic.
Enter the vendor's 32-bit enterprise number registered with the IANA (Internet Assigned Numbers
Authority).
Specify the vendor's OUI (Organization Unique Identifier). It is usually the first three bytes of the
MAC address.
Enter the serial number of the device.
Enter the product class of the device.
Click OK to save your changes back to the PMG2006-T20A.
Click Cancel to exit this screen without saving.
PMG2006-T20A User's Guide
94