ZyXEL Communications PMG2006-T20A User Manual page 93

Figure 58 Interface Group Configuration
The following table describes the fields in this screen.
Table 41 Interface Group Configuration
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
WAN Interfaces Select the WAN interface this group uses. The group can have up to one GPON interface.
used in the
Select None to not add a WAN interface to this group.
grouping
Selected LAN Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the Available LAN
Interfaces Interfaces list and use the left arrow to move them to the Selected LAN Interfaces list on the left
to add the interfaces to this group.
Available LAN
Interfaces To remove a LAN or wireless LAN interface from the Selected LAN Interfaces list, use the right-
facing arrow.
Automatically Click Add to identify LAN hosts to add to the interface group by criteria such as the type of the
Add Clients With hardware or firmware. See
the following
DHCP Vendor
IDs
# This shows the index number of the rule.
Filter Criteria This shows the filtering criteria. The LAN interface on which the matched traffic is received will
belong to this group automatically.
WildCard This shows if wildcard on DHCP option 60 is enabled.
Support
Modify Click the Modify icon to edit this rule from the PMG2006-T20A.
Chapter 11 Interface Grouping
Section 11.2.2 on page 94
PMG2006-T20A User's Guide
93
for more information.