23.1 Overview
Remote management controls through which interface(s), which services can access the PMG2006-
T20A.
Note: The PMG2006-T20A is managed using the Web Configurator.
23.2 The MGMT Services Screen
Use this screen to configure through which interface(s), which services can access the PMG2006-T20A.
You can also specify the port numbers the services must use to connect to the PMG2006-T20A. Click
Maintenance > Remote Management > MGMT Services to open the following screen.
Figure 92 Maintenance > Remote Management > MGMT Services
The following table describes the fields in this screen.
Table 73 Maintenance > Remote Management > MGMT Services
LABEL
WAN Interface
used for services
service
LAN/WLAN
Remote Management
DESCRIPTION
Select Any_WAN to have the PMG2006-T20A automatically activate the remote management
service when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the PMG2006-T20A
activate the remote management service when the selected WAN connections are up.
This is the service you may use to access the PMG2006-T20A.
Select the Enable check box for the corresponding services that you want to allow access to the
PMG2006-T20A from the LAN/WLAN.
PMG2006-T20A User's Guide
C
H A P T E R
132
23