Upnp - ZyXEL Communications PMG2006-T20A User Manual

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
1
Start Guide and
The PON LED is off if the optical transceiver has malfunctioned or the fiber cable is not connected or is
broken or damaged enough to break the PON connection.
See Section 1.5.2 on page 13
Make sure you entered your ISP account information correctly in the Network Setting > Broadband
2
screen. These fields are case-sensitive, so make sure [Caps Lock] is not on.
If you are trying to access the Internet wirelessly, make sure that you enabled the wireless LAN in the
3
PMG2006-T20A and your wireless client and that the wireless settings in the wireless client are the same
as the settings in the PMG2006-T20A.
Disconnect all the cables from your device and reconnect them.
4
If the problem continues, contact your ISP.
5
I cannot access the PMG2006-T20A anymore. I had access to the PMG2006-T20A, but my
connection is not available anymore.
Your session with the PMG2006-T20A may have expired. Try logging into the PMG2006-T20A again.
1
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide and
Turn the PMG2006-T20A off and on.
3
If the problem continues, contact your vendor.
4

31.4 UPnP

When using UPnP and the PMG2006-T20A reboots, my computer cannot detect UPnP.
Disconnect the Ethernet cable from the PMG2006-T20A's LAN port or from your computer.
1
Re-connect the Ethernet cable.
2
The Local Area Connection icon for UPnP disappears in the screen.
Restart your computer.
Chapter 31 Troubleshooting
Section 1.5 on page 19.
for details about the other LEDs.
Section 1.5 on page 19.
PMG2006-T20A User's Guide
155