Before You Begin; The Lan Setup Screen - ZyXEL Communications PMG2006-T20A User Manual

Gpon hgu with 4-port gbe switch

Table of Contents

All UPnP-enabled devices may communicate freely with each other without additional configuration.

Disable UPnP if this is not your intention.

UPnP and Zyxel

Zyxel has achieved UPnP certification from the Universal Plug and Play Forum UPnP™ Implementers

Corp. (UIC). Zyxel's UPnP implementation supports Internet Gateway Device (IGD) 1.0.

See

Section 7.4.1 on page 57

Finding Out More

See

Section 7.7 on page 60

7.1.3 Before You Begin

Find out the MAC addresses of your network devices if you intend to add them to the DHCP Client List

screen.

Use this screen to set the Local Area Network IP address and subnet mask of your PMG2006-T20A. Click

Network Setting > Home Networking to open the LAN Setup screen.

Follow these steps to configure your LAN settings.

Enter an IP address into the IP Address field. The IP address must be in dotted decimal notation. This will

become the IP address of your PMG2006-T20A.

Enter the IP subnet mask into the Subnet Mask field. Unless instructed otherwise it is best to leave this

alone, the configurator will automatically compute a subnet mask based upon the IP address you

entered.

Chapter 7 Home Networking

for examples of installing and using UPnP.

for technical background information on LANs.

PMG2006-T20A User's Guide

Table of Contents