ZyXEL Communications PMG2006-T20A User Manual page 29

This tutorial uses the following example IP settings:
Table 6 IP Settings in this Tutorial
DEVICE / COMPUTER
The PMG2006-T20A's WAN
The PMG2006-T20A's LAN
IP Type
Use Interface
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the PMG2006-T20A's Web Configurator in advanced mode.
1
Click Network Setting > Routing.
2
Click Add new Static Route in the Static Route screen.
3
Configure the Static Route Setup screen using the following settings:
4
Select Enable in Active field. Enter the Route Name as R.
4a
Set IP Type to IPv4.
4b
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4c
Select Enable in the Use Gateway IP Address field. Type 192.168.1.253 (R's N1 address) in the
4d
Gateway IP Address field.
Select Default/GPON as the Use Interface.
4e
Chapter 4 Tutorials
IP ADDRESS
172.16.1.1
192.168.1.1
IPv4
VDSL/ppp1.1
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
PMG2006-T20A User's Guide
29