Turning On Upnp In Windows 7 Example - ZyXEL Communications PMG2006-T20A User Manual

Gpon hgu with 4-port gbe switch
Table of Contents

Advertisement

Use the following screen to configure the UPnP settings on your PMG2006-T20A. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Figure 25 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 14 Network Setting > Home Networking > UPnP
LABEL
UPnP State
UPnP
UPnP NAT-T State
UPnP NAT-T
#
Description
Destination IP
Address
External Port
Internal Port
Protocol
Apply
Cancel

7.4.1 Turning On UPnP in Windows 7 Example

This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in Windows 7.
Activate UPnP on the PMG2006-T20A.
Make sure the computer is connected to a LAN port of the PMG2006-T20A. Turn on your computer and
the PMG2006-T20A.
Chapter 7 Home Networking
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open
the web configurator's login screen without entering the PMG2006-T20A's IP address (although
you must still enter the password to access the web configurator).
Select Enable to allow UPnP-enabled applications to automatically configure the PMG2006-
T20A so that they can communicate through the PMG2006-T20A by using NAT traversal. UPnP
applications automatically reserve a NAT forwarding port in order to communicate with another
UPnP enabled device; this eliminates the need to manually configure port forwarding for the
UPnP enabled application.
The table below displays the NAT port forwarding rules added automatically by UPnP NAT-T.
This is the index number of the UPnP NAT-T connection.
This is the description of the UPnP NAT-T connection.
This is the IP address of the other connected UPnP-enabled device.
This is the external port number that identifies the service.
This is the internal port number that identifies the service.
This is the transport layer protocol used for the service.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
PMG2006-T20A User's Guide
57

Advertisement

Table of Contents
loading

Table of Contents