Chapter 10 Setting A File System; Creating A File System - Fujitsu ETERNUS DX Configuration Manual

Chapter 10
Setting a File System
10.1

Creating a File System

The file system is created using exactly the same procedure as when creating a file system on a regular disk.
In each case, a confirmation message will be displayed after the command is executed. Enter "y" in response
to create the new file system.
When using single-path connection with the sd driver or hddv driver
•
Example command:
# newfs /dev/rdsk/c4t16d0s0
When using the ETERNUS Multipath Driver
•
Example command:
# newfs /dev/FJSVmplb/rdsk/mplb0s0
When using single-path connection with the Oracle Fibre Channel card or the Brocade Fibre Channel card
•
Example command:
# newfs /dev/rdsk/c2t2050000B5D6A0109d4s0
When using the MPxIO with the Oracle Fibre Channel card or the Brocade Fibre Channel card
•
Example command:
# newfs /dev/rdsk/c7t6000B5D0006A0000006A010900620000d0s0
• When using VxVM
Example command:
# newfs /dev/vx/rdsk/dg0/v0
When using SVM
•
Example command:
# newfs /dev/md/rdsk/d0
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
39
Copyright 2015 FUJITSU LIMITED
P3AM-3702-16ENZ0