Table of Contents
Advertisement
Custom Color
Mixing and Strobe
Modes
Preset Static
Color Mode
Display
Orientation
Display Time-Out
Software Version
Page 14 of 19
To custom mix a color and select the strobe speed, follow the instructions below:
1.
Press <MENU> to reach the menu's main level and Addr shows on the display.
2.
Use <UP> or <DOWN> until VAL shows on the display.
3.
Press <ENTER> and one of the following will show on the display:
·
rEd (red)
·
GrEE (green)
·
bLUE (blue)
·
So1 (strobe, slow speed)
·
So2 (strobe, medium speed)
·
So3 (strobe, fast speed)
4.
Use <UP> or <DOWN> to select the desired color or the strobe speed setting.
5.
When the desired color or strobe speed shows on the display, press <ENTER>.
With the color options, after pressing <ENTER>, the color value 0–255 (0–100%)
shows on the display. Use <UP> or <DOWN> to select the desired color value.
NOTE: Selecting 0 will turn the color off.
6.
Press <ENTER> to set the color value/strobe speed.
7.
Repeat steps 4 to 6 until you have your desired color and strobe speed.
NOTE: For no strobe effect, do not press <ENTER> when a strobe option shows on
the display
To select a preset static color, do the following:
1.
Press <MENU> to reach the menu's main level and Addr shows on the display.
2.
Use <UP> or <DOWN> until CoLo shows on the display.
3.
Press <ENTER> and C1-C9 will show on the display.
4.
Use the <UP> and <DOWN> buttons to select the desired color.
5.
Press <ENTER>.
To set the orientation of the display, follow the instructions below:
1.
Press <MENU> to reach the menu's main level and Addr shows on the display.
2.
Use <UP> or <DOWN> until dISP or dSIP shows on the display.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select either:
·
dISP for normal mode.
·
dSIP for inverted mode.
5.
Press <ENTER>.
To set the display to turn off after inactivity or not, do the following:
1.
Press <MENU> to reach the menu's main level and Addr shows on the display.
2.
Use <UP> or <DOWN> until LEd shows on the display.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select either:
·
on to set the display to turn off after inactivity.
·
oFF to set the display to stay on at all times.
5.
Press <ENTER>.
To view the software version, do the following:
1.
Press <MENU> to reach the menu's main level and Addr shows on the display.
2.
Use <UP> or <DOWN> until Ver shows on the display.
3.
Press <ENTER>.
Wash FX User Manual Rev. 1 User Manual Rev. 1
Advertisement
Table of Contents
