Table of Contents
Advertisement
94
3.
Select the seam section to be changed using
The selected seam section is shown in bold in the program
bar.
4.
Adjust the basic parameters.
Adjust the parameters for the selected seam section, p. 88.
5.
Adjust the parameters for the entire program, p. 90.
6.
7.
Use
to add a new seam section.
8.
Use
to delete the seam section marked in bold in the
program bar.
9.
Exit Edit mode using the ESC button.
The program is saved. The machine switches to Automatic
mode and the newly created program is selected.
5.6.7
Copying the program
Only the selected program is copied to a new program number.
To copy a program:
1.
Select the desired program.
2.
Press the P button.
The P above the program number will flash.
3.
Press the Softkey menu
The softkey menu appears.
Fig. 41: Softkey menu
4.
Press the numeric button under
The following display appears:
Operating Instructions 667 PREMIUM - 02.0 - 01/2018
Programming
button.
.
▲/▼
with
.
Advertisement
Table of Contents
