Setting The Correction Of Effects Of High Speed (Speed Corr.) Parameter - Dürkopp Adler 667 PREMIUM Operating Instructions Manual

Programming
Operating Instructions 667 PREMIUM - 02.0 - 01/2018
5.4.13 Setting the Correction of effects of high speed
(Speed Corr.) parameter
Some parameters are affected by high speeds because of the
resulting physical effects. To counteract these effects and to
achieve consistent results, even at high speeds, adjustment
factors can be set depending on the speed.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Menu items Setting option 1
ON/OFF
Stitchlen., Off
Stitch length
 p. 71 linear
2.OnOff
2.On
Thr.Tens., Off
Needle thread
linear
tension
 p. 72
2.OnOff
2.On
Foot Press., Off
Sewing foot
linear
pressure
 p. 72
Setting option 2
stitch length.
Min. Speed
Max. Speed
Min. Speed
Min. Speed
Thr.Tens.
Min. Speed
Max. Speed
Min. Speed
Min. Speed
Foot Press.
Min. Speed
Max. Speed
69