Table of Contents
Advertisement
Operation
Operating Instructions 667 PREMIUM - 02.0 - 01/2018
The pedal starts and controls the sewing process.
Condition
Processes
Before starting sewing
Initial situation • Pedal in rest position (position 0)
Machine is at a standstill
Needle is up. Sewing feet down.
Positioning
• Press the pedal halfway back (position -1)
The sewing feet are lifted.
the sewing
material
• Position the sewing material.
• Release the pedal.
Sewing feet are lowered onto the sewing material.
At seam beginning
Start bartack
• Press the pedal forwards (position +1) and keep it
and sew
there.
Machine sews a start bartack (if specified).
Afterwards, the machine continues to sew - with
increasing speed the further forward the pedal is
pressed.
In the middle of the seam
Stopping
• Release the pedal (position 0).
Machine stops. Depending on the setting, sewing
sewing
feet and needle are up / down.
Continue
• Press the pedal forwards (position +1)
Machine continues to sew - with increasing speed
the sewing
process (after
the further forward the pedal is pressed.
releasing the
pedal)
Sew over
• Switch on the increased sewing foot stroke with the
thicker parts of
knee button ( p. 38).
the material
nd
Changing the
• 2
stitch length
on the push buttons ( p. 39).
stitch length must be activated using the button
43
Advertisement
Table of Contents
