Programming
Parameters for selected program:
Symbol
Description
Prog. Name
A program name can be entered using the numeric
buttons:
• Use ◄/► to navigate forwards and backwards
• Use the F button to delete a letter
• Use the OK button to confirm the entry
• Use the ESC button to discard the entry
Add Values +)
• St.Len. +)
• Foot Stroke +)
• Thr.Tens. (+)
• Gap (+)
nd
Insert the 2
value of the parameters
Next Prog.
A subsequent program can be defined.
Loop Prog.
The program is executed as a loop, which is useful,
for instance, for ornamental stitch seams.
Thread clamp
Function active or inactive, if available.
Bobbin
Setting identical to Manual mode, p. 65.
InfoScreen
Setting identical to Manual mode, p. 67.
Piece counter
Daily piece counter, can be set to count either up or
down.
When the daily piece counter is activated, it must
be reset once after entering a value using the
function in the softkey menu to ensure it counts
correctly.
92
Operating Instructions 667 PREMIUM - 02.0 - 01/2018