Programming
Operating Instructions 667 PREMIUM - 02.0 - 01/2018
5.6.2
Creating a program using keyboard input
Creating a program using keyboard input is done completely
without sewing. All parameters for the seam sections and the
program are entered manually.
To create a program using keyboard input:
Create a new program, p. 84.
1.
►
2.
Use
to switch to the seam section selection.
3.
Use
to activate the seam section.
The following display is shown, with preset values which can
be specified at technician level.
Fig. 38: Programming mode display
4.
Set the basic parameters that are explained in the table.
Symbol
Meaning
Stitch length for the current seam section
Value range: 00.0 - 12.0 [mm] (depending on the subclass)
• Use ◄/► to select the Stitch length parameter
• Use ▲/▼ to change the stitch length
1
4.5
25
-
5 2.0
+
85