Vitek Transcendent Series Quick Start Manual
  1. Manuals
  2. Brands
  3. Vitek Manuals
  4. Security Camera
  5. Transcendent Series
  6. Quick start manual

Vitek Transcendent Series Quick Start Manual

4 megapixel indoor/outdoor wdr ip fixed vandal dome camera with matrix ir
Hide thumbs Also See for Transcendent Series:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
QUICK START GUIDE
FEATURES:
• 1/3" 4.0 Megapixel CMOS Image Sensor
• Up to 30fps live view @ 4 MegaPixel (2592x1520)
• Available with 3.6 or 2.8mm Fixed Lens
• 1 Matrix IR (up to 100' IR Range)
• True Wide Dynamic Range
• True Mechanical Day/Night function by ICR
• XD-DNR (3D & 2D-DNR) Noise Reduction
• 1 Ch. Alarm In + 1 Ch. Alarm Out
• 1 Ch. Audio In*
• Abnormal Video, Face Detection, Regional Intrusion Detection, Regional
Entrance / Exiting Detection, Line Crossing, Target Counting Detection
• H.265, H.264 & MJPEG Compression
• Remote Viewing via CMS, Internet Explorer, and iOS & Android Apps
• ONVIF Compliant
• MicroSD Card Slot for Local Recording (128GB)
• IP67 Weather Resistance + IK10 Impact Rating
• Optional Junction Box (VT-TJB03A), Wall Mount (VT-TWMT3) and
In-Ceiling Semi Flush Mount (VT-TFMT-S) Available
• 12VDC & PoE (Power over Ethernet) Operation
• Available in Ivory or Charcoal Grey (VTD-TND4RFA3B)
*Please research local, state and federal laws
VTD-TND4RFA3
4 MegaPixel Indoor/Outdoor
WDR IP Fixed Vandal Dome
PLEASE NOTE:
Complete User Guide, Software, Tools, and Updates are
available online. Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads
Transcendent Series
Camera with Matrix IR

Advertisement

Table of Contents
loading

Related Manuals for Vitek Transcendent Series

Summary of Contents for Vitek Transcendent Series

  • Page 1 VTD-TND4RFA3 Transcendent Series 4 MegaPixel Indoor/Outdoor WDR IP Fixed Vandal Dome Camera with Matrix IR QUICK START GUIDE FEATURES: • 1/3” 4.0 Megapixel CMOS Image Sensor • Up to 30fps live view @ 4 MegaPixel (2592x1520) • Available with 3.6 or 2.8mm Fixed Lens •...

  • Page 2: Components And Accessories

    Components and Accessories Rubber plug Camera Quick start guide 4 tapping screws PA 4×2 ×4 Screwdriver Drill template Plastic plug Overview Ethernet connector Audio input connector Alarm input/output Power connector Reset Micro SD Card Slot Cable Connections First connect the Waterproof Cap to an Ethernet patch cable, then connect the cameras ethernet adaptor.
  • Page 3 C onnecting A lar m I nput/O utput A lar m I nput A L A R M -I N Sensor A L A R M -G N D A lar m O utput A L A R M -C O M A lar m A L A R M -O P E N P ower S our ce...

  • Page 4: Installation

    Installation 3. Route the cables and 3. Route the cables and connect the power & video connect the power & video 4. Before adjusting the three-axis camera mount, preview the cables, use the rubber plug cables, use the rubber plug camera on a monitor, then adjust as necessary achieve the to fill the gap of the mounting to fill the gap of the mounting...

  • Page 5: Lan Configuration

    LAN Configuration LAN Configuration LAN Configuration Switch Switch Switch Network Cable Network Cable Network Cable Network Cable MENU MENU Network Cable Network Cable IP Camera IP Camera MENU Computer Computer Router Router Computer Router The camera can be accessed on the local network either using the The camera can be accessed on the local network either using the The camera can be accessed on the local network either using the IP-Tool or directly in a web browser.
  • Page 6 4. Double-click the IP address and then the system will pop up the web 4. Double-click the IP address and then the system will pop up the web 4. Double-click the IP address and then the system will pop up the web browser to connect IP-CAM .
  • Page 7 2. Open the IE Browser and input the default address of IP-CAM and 2. Open the IE Browser and input the default address of IP-CAM and 2. Open the IE Browser and input the default address of IP-CAM and confirm. The IE browser will download Active X control. confirm.

  • Page 8: Limited Product Warranty

    (3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning.

This manual is also suitable for:

Vtd-tnd4rfa3

Table of Contents