Table Support Rod
Lubricant
Frequency
Light Machine
Monthly
Oil
Use a shop rag and mineral spirits to wipe away
any built up grime and debris off of the table sup-
port rod, then brush on a thin coat of light machine
oil onto the shaft (see Figure 80). Move the work
table back and forth to distribute the oil.
Figure 80. Table support rod lubrication.
Model G1014Z/G1014ZX (Mfd. Since 07/17)
Rocker Plate
Qty
Lubricant
Thin Coat
NLGI #2 Grease Yearly
Clean the rocker plate with mineral spirits and
a rag, and brush a dollop of grease onto the
rocker plate. Move the quick release tension lever
foward and backward to spread the grease (see
Figure 81).
Frequency
Rocker
Plate
Figure 81. Rocker plate lubrication.
Qty
Dollop
-45-