Table of Contents
Advertisement
cERTIfIcATION
5 Certification
5.1 Certification
5.1.1 cE-Marking
CE marked frequency inverter and servo drives were developed and manufactured to
comply with the regulations of the Low-Voltage Directive. The harmonized standards of
the series
This is a product of limited availability in accordance with
cause radio interference in residential areas. In this case the operator may need to take
corresponding measures.
The inverters or servo drives must not be started until it is determined that the installation
complies with the machine directive as well as the EMC-directive (note
5.1.2 UL certifications
An UL certification is in preparation.
5.2 further informations and documentation
You find supplementary manuals and instructions for the download under
"http://www.keb.de > Service & Downloads > Downloads".
General instructions
•
•
Instruction and information for construction and development
•
•
•
Approvals and approbations
•
•
•
Others
•
•
42
EN 61800-5-1
and
EN 61800-3
EMC and safety instructions
Manuals for control boards, safety modules, fieldbus modules, etc.
Input fuses in accordance with UL
Programming manual for control and power unit
Motor configurator to select the appropriate inverter and to create downloads for
parameterizing the inverter.
Declaration of conformity CE
TÜV certificate
FS Certification
COMBIVIS, the software for comfortable parameterization of drive converters via
PC (available per download)
EPLAN- drawings
were used.
EN
61800-3. This product may
EN
60204-1).
Advertisement
Table of Contents
