Serial Port 1 Configuration; Serial Port 2 Configuration - Nexcom PEAK 888 User Manual

Chapter 3: BIOS Setup

Serial Port 1 Configuration

This section is used to configure serial port 1.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.

Serial Port 2 Configuration

This section is used to configure serial port 2.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
Onboard Serial Port Mode
Configures the serial port mode to RS232, RS422, RS485 or RS485 Auto.
Terminal 120 Ohm
Enables or disables serial port terminal resistance.
34
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Serial Port 2 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Onboard Serial Port Mode [RS232]
Terminal 120 Ohm [Disabled]
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PEAK 888 User Manual