Lcd Control - Nexcom PEAK 888 User Manual

Chapter 3: BIOS Setup

LCD Control

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display [VBIOS Default]
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Primary IGFX Boot Display
Selects the video device which will be activated during POST. This has no
effect if external graphics is present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on
primary display
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
PEG Port Configuration
Select the Video Device which
will be activated during POST.
This has no effect if external
graphics present. Secondary boot
display selection will appear
based on your selection.
VGA modes will be supported
only on primary display
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable Root Port
Enables or disables the root port.
Max Link Speed
Select the maximum link speed of the PEG device.
43
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Chipset
PEG Port Configuration
PEG 0:1:0 Not Present
Enable Root Port [Enable]
Max Link Speed [Auto]
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PEAK 888 User Manual