Serial Port 1 Configuration; Serial Port 2 Configuration - Nexcom NEX 912 User Manual

Chapter 3: BIOS Setup

Serial Port 1 Configuration

This section is used to configure serial port 1.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Mode [RS232]
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Serial Port
Enables or disables the serial port.
Mode
Configures the serial port mode to RS232, RS422, RS485D or RS485R.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.

Serial Port 2 Configuration

This section is used to configure serial port 2.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
26
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
Serial Port 2 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 912 User Manual