It8783F Super Io Configuration; Serial Port 1 Configuration - Nexcom PEAK 886VL2 User Manual

Chapter 3: BIOS Setup

IT8783F Super IO Configuration

This section is used to configure the I/O functions supported by the onboard
Super I/O chip.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
IT8783F Super IO Configuration
IT8783F Super IO Chip IT8783F

Serial Port 1 Configuration


Serial Port 2 Configuration

Serial Port 3 Configuration

Serial Port 4 Configuration

IR Device

Parallel Port Configuration

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ITB8783 Super IO Chip
Displays the Super I/O chip used on the board.
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
Serial Port 1 Configuration
This section is used to configure serial port 1.
Set Parameters of Serial Port
1 (COMA)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
30
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [Auto]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PEAK 886VL2 User Manual