Hardware Specifications - Nexcom PEAK 888 User Manual

Chapter 1: Product Introduction

Hardware Specifications

CPU Support
▪ 6th generation Intel
Core™ i7/i5/i3 processor (65W/35W) TDPs, socket
®
LGA1151
Main Memory
▪ 2x DIMM, support dual channel DDR4 non-ECC DIMM 1866/2133 MT/S
(Maximum 32GB)
Platform Control Hub
▪ Intel
H110 Express Chipset PCH
®
▪ Intel
Q170 Express Chipset PCH
®
BIOS
▪ AMI system BIOS
▪ 16MBit SPI depended on AMT function
▪ Dual BIOS for four PCIe x1 and one PCIe x4
Display
▪ The Processor Graphics contains a refresh of the ninth generation graphics
▪ Intel
HD Graphics 530
®
▪ Support independent triple display
▪ VGA: Resolution up to 1920*1200 pixels @60MHz
▪ DVI: Resolution up to 1920*1200 pixels @60MHz
▪ HDMI: Resolution up to 4096*2304 pixels @60MHz
▪ DP: Resolution up to 4096*2304 pixels @60MHz
* Supporting 4K display requires two DDR channels of same size
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Audio
▪ High definition audio interface (Compatible with NEXCOM audio
daughter board P/N: 10E000HDA00X0 EBK-HAD)
Onboard LAN
▪ 1x Intel
WG1219LM GbE PHY (PEAK 888Q supports Intel
®
▪ 1x Intel
® I211 Gigabit Ethernet Controller
▪ RJ45 with LED connecter x 2
▪ Support Boot from LAN (PXE)
▪ Support Wake on LAN
I/O Interface
▪ 1x PCI Express x16 and 1 PCI Express x4 to backplane
▪ 4x PCI to backplane
▪ SATA port
PEAK 888VL2-H
– 3x SATA 3.0 Port (2x SATA 3.0 to BP through BIOS setting)
– 1x M.2 2280/22110 M Key (SATA 3.0)
PEAK 888VL2-Q
– 5x SATA 3.0 port (2x SATA 3.0 to BP through BIOS setting)
– 1x M.2 2280/22110 M Key (NVMe Gen 3 PCIe x4)
– Support RAID 0/1/5/10
– SIO: ITE8786, COM 1, 3, 4 support RS232, COM2 supports
RS232/422/485 and can be selected RI/5V/12V through jumper
– PS2 KB/MS *1 JST connector
– Parallel Port: 26-pin box header x 1
2
AMT 11)
®
PEAK 888 User Manual