Save & Exit - Nexcom PEAK 888 User Manual

Chapter 3: BIOS Setup
Save & Exit
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Main Advanced Chipset Security
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Boot Override
UEFI: Built-in EFI Shell
UEFI: JetFlashTranscend 16GB 1100, Partition 1
JetFlashTranscend 16GB 1100
Launch EFI Shell from filesystem device
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Save Changes and Reset
To save the changes and reset, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting Yes.
Discard Changes and Reset
To exit the Setup utility and reboot the system without saving the changes,
select this field then press <Enter>. You may be prompted to confirm again
before exiting.
Restore Defaults
To restore the BIOS to default settings, select this field then press <Enter>.
A dialog box will appear. Confirm by selecting Yes.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Reset the system after saving the
changes.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
48
PEAK 888 User Manual