Cpu Configuration - Nexcom PEAK 888 User Manual

Chapter 3: BIOS Setup

CPU Configuration

This section is used to configure the CPU.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
506E3
CPU Signature
6A
Microcode Patch
3200 MHz
Max CPU Speed
800 MHz
Min CPU Speed
3200 MHz
CPU Speed
4
Processor Cores
Not Supported
Hyper Threading Technology
Supported
Intel VT-x Technology
Supported
Intel SMX Technology
Supported
64-bit
Supported
EIST Technology
Supported
CPU C3 state
CPU C6 state Supported
Supported
CPU C7 state
Supported
CPU C8 state
Not Supported
CPU C9 state
CPU C10 state Not Supported
32 kB x 4
L1 Data Cache
32 kB x 4
L1 Code Cache
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Active Processor Cores
Select the number of cores to enable in each processor package.
Intel ® Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
▲
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
▼
38
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced
Processor Cores 4
Hyper Threading Technology Not Supported
Intel VT-x Technology Supported
Intel SMX Technology Supported
64-bit Supported
EIST Technology Supported
CPU C3 state Supported
CPU C6 state Supported
CPU C7 state Supported
CPU C8 state Supported
CPU C9 state Not Supported
CPU C10 state Not Supported
L1 Data Cache 32 kB x 4
L1 Code Cache 32 kB x 4
L2 Cache 256 kB x 4
L3 Cache 6 MB
L4 Cache Not Present
Active Processor Cores [All]
Intel Virtualization Technology [Enabled]
Intel(R) SpeedStep(tm) [Disabled]
CPU C states [Disabled]
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
EIST
Enables or disables Intel SpeedStep.
®
CPU C States
Enable CPU C States Support for power saving.
▲
Select the number of cores to
enable in each processor package.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
▼
PEAK 888 User Manual