Projecting; Selecting The Input Signal - Panasonic PT-RQ32K Operating Instructions Manual

Projecting

Check the projection lens attachment (x page 48), external device connection (x page 51), power cord
connection (x page 59), switch on the power (x page 61) to start projecting. Select the video for projection,
and adjust appearance of the projected image.

Selecting the input signal.

The input of the image to project can be switched. Method to switch the input is as follows.
f Press the input selection button on the remote control and directly specify the input of the image to project.
f Press the input selection button on the control panel and directly specify the input of the image to project.
f Display the input selection screen and select the input of the image to project from the list.
Switching the input directly with the remote control
The input of the image to project can be switched by directly specifying it with the input selection button on the
remote control.
1) Press the input selection button (<DIGITAL LINK>, <DVI-D>, <HDMI>, <SLOT 1>, <SLOT 2>, <SDI>).
<DIGITAL LINK>
<DVI-D>
<HDMI>
<SLOT 1>
<SLOT 2>
<SDI>
Attention
f Images may not be projected properly depending on the external device, or the Blu-ray disc or DVD disc, to be played back.
Set the [PICTURE] menu → [SYSTEM SELECTOR]. When the SDI signal is input, set the [DISPLAY OPTION] menu → [SDI IN], or set the
[DISPLAY OPTION] menu → [SLOT IN].
f Confirm the aspect ratio of the projection screen and the image, and switch to an optimum aspect ratio from the [POSITION] menu →
[ASPECT].
70 - ENGLISH
Chapter 3 Basic Operations — Projecting
Remote control
Switches the input to DIGITAL LINK.
The image of the signal input to the <DIGITAL LINK/LAN> terminal is projected.
Switches the input to DVI-D.
This can be operated when the optional Interface Board equipped with the DVI-D input is installed in
the slot.
The input is switched every time the button is pressed when one of the DVI-D inputs is selected on
the installed optional Interface Board.
Switches the input to HDMI.
This can be operated when the optional Interface Board equipped with the HDMI input is installed in
the slot.
The input is switched every time the button is pressed when one of the HDMI inputs is selected on
the installed optional Interface Board.
Switches the input to the signal of the optional Interface Board installed in <SLOT 1>.
The input is switched every time the button is pressed when one of the inputs is selected on the
installed optional Interface Board.
Switches the input to the signal of the optional Interface Board installed in <SLOT 2>.
The input is switched every time the button is pressed when one of the inputs is selected on the
installed optional Interface Board.
Switches the input to SDI1, SDI2, SDI3, or SDI4 installed on the projector as standard.
The input is switched every time the button is pressed when one of the SDI inputs equipped on the
projector as standard is selected.
All the SDI inputs including the SDI input equipped on the projector as standard and the SDI input on
the installed optional Interface Board are switched when an optional Interface Board equipped with
the SDI input is installed in the slot.
Control panel