Panasonic PT-RQ32K Operating Instructions Manual page 124

r Structure of the projected image
The single link is a setting to display one image with one input signal. The dual link is a setting to display one
image with two input signals. The quad link is a setting to display one image with four input signals.
Single link
Setting [SIGNAL LEVEL] in [SLOT IN] (DVI-D input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4) Press as to select [SIGNAL LEVEL].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[0-255:PC]
[16-235]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
Setting [EDID SELECT] in [SLOT IN] (DVI-D input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [EDID SETTING], and press the <ENTER> button.
f The [EDID SETTING] screen is displayed.
4) Press as to select [EDID SELECT].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[EDID3]
[EDID1]
124 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
DVI-D1/
DVI-D3
Dual link
Automatically sets the signal level.
Select this item when the DVI-D terminal output of the external device (such as computer) is input to
the <DVI-D IN 1> terminal, the <DVI-D IN 2> terminal, the <DVI-D IN 3> terminal, or the <DVI-D IN
4> terminal.
Select this item when the HDMI terminal output from the external device (such as Blu-ray disc player)
is input to the <DVI-D IN 1> terminal, the <DVI-D IN 2> terminal, the <DVI-D IN 3> terminal, or the
<DVI-D IN 4> terminal via a conversion cable, etc.
Recognizes movie-based video signals and still image signals automatically.
Select this item mainly when the external device (such as Blu-ray disc player) which outputs the
moving image signal is connected to the <DVI-D IN 1> terminal, the <DVI-D IN 2> terminal, the
<DVI-D IN 3> terminal, or the <DVI-D IN 4> terminal.
DVI-D2/
DVI-D4
DVI-D1 DVI-D2
DVI-D3 DVI-D4
Quad link