Panasonic PT-RQ32K Operating Instructions Manual page 168

[LENS NAME]
*2
[LENS THROW RATIO]
[LENS ZOOM TYPE]
[ZOOM CALIBRATION]
[ON COUNT]
[FILTER TYPE]
[FILTER COUNTER]
[OPERATING MODE]
[HIGH]
[NORMAL]
[LONG LIFE1]
[LONG LIFE2]
[LONG LIFE3]
[USER1]
[USER2]
[USER3]
[CONSOLIDATED RUNTIME]
[UPGRADE KIT]
[SLOT1]
[SLOT2]
[SIGNAL INFORMATION]
168 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the name set to the projection lens.
Displays the range of throw ratio supported by the projection lens in accordance with the [LENS
*2
TYPE] setting.
Displays the drive method of the zoom motor attached to the projection lens.
*2
Displays the zoom calibration result ([OK]/[FAILED]) and the calibration date.
*2
[POWER ON TIMES]
[MECHANICAL SHUTTER]
Displays the setting value of the [PROJECTOR SETUP] menu → [FILTER SETTING] → [FILTER
TYPE].
Displays the runtime of the filter (counter numeric value) and the recommend time to replace the filter.
*3*4
Displays the setting value of the [PROJECTOR SETUP] menu → [OPERATION SETTING] →
[OPERATING MODE].
Displays the runtime of the light source with [OPERATING MODE] set to [HIGH].
Displays the runtime of the light source with [OPERATING MODE] set to [NORMAL].
Displays the runtime of the light source with [OPERATING MODE] set to [LONG LIFE1].
Displays the runtime of the light source with [OPERATING MODE] set to [LONG LIFE2].
Displays the runtime of the light source with [OPERATING MODE] set to [LONG LIFE3].
Displays the runtime of the light source with [OPERATING MODE] set to [USER1].
Displays the runtime of the light source with [OPERATING MODE] set to [USER2].
Displays the runtime of the light source with [OPERATING MODE] set to [USER3].
Converts the total runtime of the light sources with [OPERATING MODE] set to each item into the
time used with the [NORMAL] setting.
*5
The consolidated runtime is used for a rough indication about when to perform maintenance when the
projector is used in combination of each item in [OPERATING MODE].
[ET-UK20]
[ET-CUK10]
Displays the product model number of the Interface Board installed in <SLOT 1>.
Also, the firmware version is displayed after the product model number.
Displays the product model number of the Interface Board installed in <SLOT 2>.
Also, the firmware version is displayed after the product model number.
[INPUT]
[SIGNAL FORMAT]
[LINK]
[SIMUL]
[4K DIVISION]
[COLOR FORMAT]
[SAMPLING]
[BIT DEPTH]
[SIGNAL LEVEL]
Displays the number of times the power is turned on.
Displays the number of times the mechanical shutter is closed.
It is counted when [MECHANICAL SHUTTER] is set to [ENABLE].
Displays the activation status by the Upgrade Kit (Model No.:
ET-UK20).
Displays the activation status by the Auto Screen Adjustment
Upgrade Kit (Model No.: ET-CUK10).
Displays the input terminal used for the projected image.
Displays the representative input terminal when one image is
displayed with multiple input signals.
[MULTI DISPLAY] is displayed while in the four-screen display
mode.
Displays the format of the input signal.
Displays the settings of [SDI LINK], [HDMI LINK], and [DVI-D LINK].
Displays the determination result of the signal when set to [AUTO].
Displays the [SIMUL INPUT SETTING] setting.
Displays the determination result of the signal when set to
[AUTO(x2-speed)] or [AUTO(x4-speed)].
Displays the [4K DIVISION] setting.
Displays the determination result of the signal when set to [AUTO].
Displays the color format of the input signal.
Displays the sampling information of the input signal.
Displays the gradation of the input signal.
Displays the signal level of the input signal.