Optional Accessories - Panasonic PT-RQ32K Operating Instructions Manual

Optional accessories

Optional accessories (product name)
Projection lens
Stepping Motor Kit
Lens Fixed Attachment
Interface Board
Replacement Filter Unit
Long Life Filter Unit
Smoke Cut Filter
Early Warning Software
(Basic license/3-year license)
Upgrade Kit
Auto Screen Adjustment Upgrade Kit
Auto Screen Adjustment Upgrade Kit (PC)
Digital Interface Box
DIGITAL LINK Switcher
*1 The suffix of the Model No. differs according to the license type.
Note
f The Fixed-focus Lens (Model No.: ET-D75LE90) (production discontinued) can also be used.
However, considering the focus quality, use it by setting the [PROJECTOR SETUP] menu → [LIGHT OUTPUT] to 77.0 % or
less. The luminance when [LIGHT OUTPUT] is set to 77.0 % is 20 000 lm (approximate).
f The Stepping Motor Kit (Model No.:ET-D75MKS10) is a product to replace the standard DC motor unit installed in the Zoom
Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30, ET-D75LE40) with the stepping motor
unit. For how to replace the motor of the Zoom Lens, refer to the Operating Instructions of the Stepping Motor Kit.
f To use the 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G), it is necessary for the firmware version of the
3G-SDI Terminal Board with Audio to be 2.00 or later. Consult your dealer regarding the version update to the latest firmware
if the version is earlier than 2.00.
For details on how to confirm the firmware version, refer to "How to confirm the firmware version of the Interface Board
(optional)" (x page 33).
f When performing the simultaneous input of the 4K image (resolution of 3 840 x 2 160 or 4 096 x 2 160) using the Interface
Board for HDMI 2 input (Model No.: ET-MDNHM10), it is necessary for the firmware version of the Interface Board for HDMI
2 input to be 2.00 or later. If the version is earlier than 2.00, the simultaneous process is not performed even if corresponding
signal is input. Consult your dealer regarding the version update to the latest firmware.
For details on how to confirm the firmware version, refer to "How to confirm the firmware version of the Interface Board
(optional)" (x page 33).
f The expansion function by applying the optional Upgrade Kit (Model No.: ET-UK20) cannot be used when the video signal in
simultaneous format is input.
f For details on how to attach the Long Life Filter Unit (Model No.: ET-EMFU330), refer to "Attaching the Long Life Filter Unit
(optional)" (x page 264).
f For details on how to attach the Smoke Cut Filter (Model No.: ET-SFR330), refer to "Attaching the Smoke Cut Filter Unit
(optional)" (x page 267).
f The model numbers of optional accessories are subject to change without prior notice.
f The optional accessories described in this document are as of September 2017. Optional accessories may be added or
changed without prior notice.
For the latest information, visit the Panasonic website (https://panasonic.net/cns/projector/).
26 - ENGLISH
Chapter 1 Preparation — Precautions for use
Zoom Lens
Fixed-focus Lens
Interface Board for HDMI 2
input
Interface Board for DVI-D
2 input
3G-SDI Terminal Board with
Audio
ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20,
ET-D75LE30, ET-D75LE40
ET-D75LE50, ET-D75LE95
ET-D75MKS10
ET-PLF10
ET-MDNHM10
ET-MDNDV10
TY-TBN03G
ET-EMF330
ET-EMFU330
ET-SFR330
ET-SWA100 Series
*1
ET-UK20
ET-CUK10
ET-CUK10P
ET-YFB100G
ET-YFB200G
Model No.