Panasonic PT-RQ32K Operating Instructions Manual page 67

Chapter 3 Basic Operations — Switching on/off the projector
Initial setting (time zone)
Set [TIME ZONE] in accordance with the country or region where you use the projector.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE
AND TIME]. The current settings are displayed in [LOCAL DATE] and [LOCAL TIME].
1) Press qw to switch the setting.
2) Press the <ENTER> button to proceed to the initial setting.
Note
f In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korea Standard Time). Change the setting of the
[PROJECTOR SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
Initial setting (date and time)
Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR
SETUP] menu → [DATE AND TIME].
To set the date and time automatically, refer to "Setting the date and time automatically" (x page 160).
1) Press as to select an item.
2) Press qw to switch the setting.
3) Press the <ENTER> button.
f Confirm the setting value and complete the initial setting.
INITIAL SETTING
TIME ZONE +09:00
20XX/01/01
LOCAL DATE
12：34：56
LOCAL TIME
Please set up a time zone according to the area of your
country or region.
CHANGE
SET
ENTER
INITIAL SETTING
20XX
YEAR
MONTH 1
DAY 1
HOUR 12
MINUTE 34
56
SECOND
Please set the date and time of the built-in clock of the
projector.
MENU SELECT CHANGE
SET
ENTER
6/7
7/7
ENGLISH - 67