Panasonic PT-RQ32K Operating Instructions Manual page 146

f It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
18) Wait until [Waiting time] turns [0s].
f Wait until the focus is stabilized.
f When the [Waiting time] turns [0s], the [Please wait...] message disappears, and [NEXT] becomes
selectable.
19) Press qw to select [NEXT], and press the <ENTER> button.
f The [SETUP ASSISTANT] screen (page 5/8) is displayed.
f It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
20) Press asqw to select [FOCUS POSITION].
21) Press the qw button to adjust the focus.
22) Press asqw to select [NEXT], and press the <ENTER> button.
f The [SETUP ASSISTANT] screen (page 6/8) is displayed.
23) Press asqw to select [TEST PATTERN].
24) Press qw to select [INTERNAL].
f The items will switch each time you press the button.
[INTERNAL]
[EXTERNAL]
25) Press asqw to select [NEXT], and press the <ENTER> button.
f The [SETUP ASSISTANT] screen (page 7/8) is displayed.
f It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
26) Wait until [Waiting time] turns [0s].
f Wait until the focus is stabilized.
f When the [Waiting time] turns [0s], the [Please wait...] message disappears, and [NEXT] becomes
selectable.
27) Press qw to select [NEXT], and press the <ENTER> button.
f The [SETUP ASSISTANT] screen (page 8/8) is displayed.
f It will return to previous screen by selecting [BACK] and pressing the <ENTER> button.
28) Press asqw to select [FOCUS POSITION].
29) Press the qw button to adjust the focus.
30) Press asqw to select [STORE], and press the <ENTER> button.
f [SETUP ASSISTANT] is completed, and the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS
OFFSET DARK] are updated.
Note
f When the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set by executing [SETUP ASSISTANT], the
[PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [ACTIVE FOCUS] will be set to [ON].
f When [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] are set following the guidance of [SETUP ASSISTANT] with AC 100 V
to AC 120 V, use the projector with AC 100 V to AC 120 V. When the power supply is changed to AC 200 V to AC 240 V, reset the settings
using [SETUP ASSISTANT].
Performing simplified setting using the external input image
Input any focus adjustment still image from the external device connected to the projector, and set the parameters
for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] following the guidance of [SETUP ASSISTANT].
1) Switch to the input to display the focus adjustment image.
2) Press as to select [LENS].
3) Press the <ENTER> button.
f The [LENS] screen is displayed.
146 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Uses the internal focus test pattern of signal level approximately 0 % for focus adjustment.
Select this item when using the input image from an external device for focus adjustment.