[Art-Net Channel Setting] - Panasonic PT-RQ32K Operating Instructions Manual

[Art-Net CHANNEL SETTING]

Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to "Using Art-Net
function" (x page 229).
1) Press as to select [Art-Net CHANNEL SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[2]
[3]
*1
[USER]
[1]
*1 This item can be set in following cases.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30,
ET-D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a projection
lens with the stepping motor is attached.
f When anything other than [USER] is selected, the function assigned to the channel is displayed by pressing
the <ENTER> button.
f When [USER] is selected, proceed to Step 3).
3) Press the <ENTER> button.
f The [Art-Net CHANNEL SETTING] screen is displayed.
4) Press as to select the channel to set, and pressqw to switch the item.
[LIGHT OUTPUT]
[INPUT SELECT]
[LENS POSITION]
[LENS H SHIFT]
[LENS V SHIFT]
[LENS FOCUS]
[LENS ZOOM]
[POWER]
[SHUTTER]
[FADE-IN]
[FADE-OUT]
[GEOMETRY]
[CUSTOM MASKING]
[FREEZE]
[COLOR]
[TINT]
[RASTER PATTERN]
[LENS H SHIFT MSB]
[LENS H SHIFT LSB]
[LENS V SHIFT MSB]
[LENS V SHIFT LSB]
[LENS FOCUS MSB]
[LENS FOCUS LSB]
[LENS ZOOM MSB]
[LENS ZOOM LSB]
[ENABLE/DISABLE]
[NONE]
*1 These items can be selected in following case.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20, ET-D75LE30,
ET-D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a projection
lens with the stepping motor is attached.
f The setting can be also made by pressing as to select the channel, pressing the <ENTER> button to
display the item list, pressing asqw to select the item, and pressing the <ENTER> button.
Chapter 4 Settings — [NETWORK] menu
Uses the channel assignment in standard setting.
Uses the channel assignment with the setting that can numerically control the lens position.
Changes the channel assignment.
Uses the channel assignment with DZ21K series compatible.
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
Adjusts the amount of light.
Switches the input.
Moves the lens position.
Adjusts the lens shift in the horizontal direction.
Adjusts the lens shift in the vertical direction.
Adjusts the focus.
Adjusts the zoom.
Controls the power status.
Controls the shutter.
Sets the fade-in time.
Sets the fade-out time.
Performs geometric adjustment.
Performs geometric adjustment using a computer.
To use PC-1, PC-2, and PC-3, the optional Upgrade Kit (Model No.: ET-UK20) is required.
Freezes the projected image.
Adjusts the color saturation.
Adjusts the tint.
Displays the raster pattern.
Coarsely adjusts the horizontal position of the lens.
*1
Finely adjusts the horizontal position of the lens.
*1
Coarsely adjusts the vertical position of the lens.
*1
Finely adjusts the vertical position of the lens.
*1
Coarsely adjusts the focus position of the lens.
*1
Finely adjusts the focus position of the lens.
*1
Coarsely adjusts the zoom position of the lens.
*1
Finely adjusts the zoom position of the lens.
*1
Enables/disables the control of the projector with the Art-Net function.
No definition
ENGLISH - 187