Removing The Fork Legs; Installing The Fork Legs - Husqvarna TC 50 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.7
11.8
46

Removing the fork legs

A00084-10
H01853-10
A00096-10

Installing the fork legs

S01480-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not kink the brake line.
(TC 50)
–
3
Loosen screws . Remove the left fork leg.
–
Loosen screws 4 . Remove the right fork leg.
(TC 50 Mini)
–
3
Loosen screws . Remove the left fork leg.
–
4
Loosen screws . Remove the right fork leg.
Main work
(TC 50)
–
Position the fork legs.
1
Bleeder screws
Info
The second milled groove in the fork leg must
be flush with the upper edge of the upper triple
clamp.
p. 43)
( p. 90)
are positioned toward the front.