Husqvarna TC 50 Owner's Manual page 130

21 SUBSTANCES
Gear oil (SAE 75W)
Standard/classification
–
SAE (
Guideline
–
Use only gear oils that comply with the specified standards (see specifications on the container) and that
exhibit the required properties.
Recommended supplier
Bel‑Ray
–
Gear Saver
Shock absorber fluid (SAE 2.5) (50180751S1)
Standard/classification
–
SAE (
Guideline
–
Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.
Super unleaded (ROZ 95/RON 95/PON 91)
Standard/classification
–
DIN EN 228 (ROZ 95/RON 95/PON 91)
Guideline
–
Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.
–
Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.
Super unleaded (95 octane) mixed with 2-stroke engine oil (1:60)
Standard/classification
–
DIN EN 228
–
JASO FD (
Mixture ratio
1:60
Recommended supplier
Bel‑Ray
–
Si‑7 Synthetic 2T
128
p. 130) (SAE 75W)
®
p. 130) (SAE 2.5)
Info
Do not use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15,
E25, E85, E100).
p. 130) (1:60)
®
Engine oil, 2-stroke ( p. 127)
Super unleaded (ROZ 95/RON 95/PON 91) ( p. 128)