Adjusting The Rebound Damping Of The Fork (Tc 50) - Husqvarna TC 50 Owner's Manual

10.14

Adjusting the rebound damping of the fork (TC 50)

Info
The hydraulic rebound damping determines the fork suspension behavior.
Main work
–
Remove protection cap
–
Push fork pump
Fork pump (79412966000)
Info
The fork pump is included as part of the motorcycle's
separate enclosure.
S01478-10
–
Connect the fork pump to the left fork leg.
The fork pump indicator switches on automatically.
A little air escapes from the fork leg when connecting.
Info
This is due to the volume of the hose and not due to a
defect in the fork pump or the fork.
Read the accompanying instructions for
Husqvarna Motorcycles accessories.
–
Adjust the air pressure as specified.
Guideline
Air pressure
Changing of the air pressure
in steps of
Minimum air pressure
Maximum air pressure
Info
Never set the air pressure to a value outside the
stated range.
–
Disconnect the fork pump from the left fork leg.
When disconnecting, excess pressure will escape from
the hose – the fork leg itself does not lose any air.
The fork pump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Finishing work
–
Remove the motorcycle from the lift stand. (
10 TUNING THE CHASSIS
1
.
2 together fully.
2 bar (29 psi)
0.2 bar (3 psi)
1.4 bar (20 psi)
4 bar (58 psi)
p. 43)
39