Removing The Rear Wheel - Husqvarna TC 50 Owner's Manual

13.3

Removing the rear wheel

–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease the contact surfaces
Long-life grease (
–
Insert the spacers.
H01198-10
–
Clean and grease the wheel spindle.
Long-life grease (
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert the wheel spindle.
A00087-11
–
Mount and tighten screw
Guideline
Screw, front
wheel spindle
–
Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
V00545-10
firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Remove nut
Info
Cover the components to protect them against dam-
age.
–
Pull out wheel spindle
–
Remove the chain from the rear sprocket.
V00281-10
13 WHEELS, TIRES
A
of the spacers.
p. 129)
p. 129)
1
.
M10 40 Nm (29.5 lbf ft)
2
.
M6 10 Nm (7.4 lbf ft)
p. 43)
2
with washer .
3 4
with washer .
®
Loctite 243™
p. 43)
91